Python Modules

Introduction to D-Bus Python Module

D-Bus Python provides Python bindings to the D-Bus.

This package is known to build and work properly using an LFS-8.1 platform.

Package Information

D-Bus Python Dependencies

Required

dbus-glib-0.108 and Python-2.7.13 and/or Python-3.6.2

Optional (Required to build the API and HTML Documentation)

Epydoc and Docutils

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/dbus-python

Installation of D-Bus Python

To build D-Bus Python as the Python 2 module, run the following commands:

mkdir python2 &&
pushd python2 &&
PYTHON=/usr/bin/python     \
../configure --prefix=/usr --docdir=/usr/share/doc/dbus-python-1.2.4 &&
make &&
popd

To test the results, issue: make -C python2 check.

To build D-Bus Python as the Python 3 module, run the following commands:

mkdir python3 &&
pushd python3 &&
PYTHON=/usr/bin/python3    \
../configure --prefix=/usr --docdir=/usr/share/doc/dbus-python-1.2.4 &&
make &&
popd

To test the results, issue: make -C python3 check.

To install the Python 2 module, run the following command as the root user:

make -C python2 install

To install the Python 3 module, run the following command as the root user:

make -C python3 install

Contents

Introduction to PyAtSpi2

The PyAtSpi2 package contains Python bindings for the core components of the GNOME Accessibility.

This package is known to build and work properly using an LFS-8.1 platform.

Package Information

PyAtSpi2 Dependencies

Required

PyGObject-3.24.1

Recommended

at-spi2-core-2.24.1

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/pyatspi2

Installation of PyAtSpi2

To build PyAtSpi2 as the Python 2 module, run the following commands:

mkdir python2 &&
pushd python2 &&
../configure --prefix=/usr --with-python=/usr/bin/python &&
make &&
popd

To build PyAtSpi2 as the Python 3 module, run the following commands:

mkdir python3 &&
pushd python3 &&
../configure --prefix=/usr --with-python=/usr/bin/python3 &&
make &&
popd

This package does not come with a testsuite.

To install the Python 2 module, run the following command as the root user:

make -C python2 install

To install the Python 3 module, run the following command as the root user:

make -C python3 install

Contents

Introduction to PyCairo Module

PyCairo provides Python bindings to Cairo.

This package is known to build and work properly using an LFS-8.1 platform.

Package Information

PyCairo Dependencies

Required

Cairo-1.14.10, Python-2.7.13, and/or Python-3.6.2

Optional

Hypothesis (for tests)

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/pycairo

Installation of PyCairo

Install PyCairo for Python2 by running the following commands:

python2 setup.py build

This package does not come with a test suite.

Now, as the root user:

python2 setup.py install --optimize=1

Install PyCairo for Python3 by running the following commands:

python3 setup.py build

This package does not come with a test suite.

Now, as the root user:

python3 setup.py install --optimize=1

Contents

Introduction to the PyCrypto Module

PyCrypto is a collection of both secure hash functions (such as SHA256 and RIPEMD160), and various encryption algorithms (AES, DES, RSA, ElGamal, etc.).

This package is known to build and work properly using an LFS-8.1 platform.

Package Information

PyCrypto Dependencies

Required

Python-2.7.13 and/or Python-3.6.2

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/pycrypto

Installation of PyCrypto

To build the Python 2 module, run the following command:

python setup.py build

To install the Python 2 module, run the following command as the root user:

python setup.py install --optimize=1

To build the Python 3 module, run the following command:

python3 setup.py build

To install the Python 3 module, run the following command as the root user:

python3 setup.py install --optimize=1

Contents

Introduction to PyGObject Module

PyGObject-2.28.6 provides Python 2 bindings to the GObject class from GLib.

This package is known to build and work properly using an LFS-8.1 platform.

Package Information

Additional Downloads

PyGObject Dependencies

Required

GLib-2.52.3 and PyCairo-1.15.1 (Python 2)

Optional

gobject-introspection-1.52.1 and libxslt-1.1.29 (to Build Documentation)

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/pygobject2

Installation of PyGObject

Install PyGObject by running the following commands:

patch -Np1 -i ../pygobject-2.28.6-fixes-1.patch   &&
./configure --prefix=/usr --disable-introspection &&
make

This package does not have a working testsuite.

Now, as the root user:

make install

Command Explanations

--disable-introspection: Omit this switch if you have installed gobject-introspection-1.52.1. Note that it conflicts with PyGObject-3.24.1.

--disable-docs: This option disables the rebuilding of the html documentation if libxslt-1.1.29 is installed.

Contents

Introduction to PyGObject3 Module

PyGObject3 provides Python bindings to the GObject class from GLib.

This package is known to build and work properly using an LFS-8.1 platform.

Package Information

PyGObject3 Dependencies

Required

gobject-introspection-1.52.1 and PyCairo-1.15.1 (for Python 2 and/or Python 3 bindings)

Optional (for the tests)

pep8 and pyflakes

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/pygobject3

Installation of PyGObject3

To build PyGObject3 as the Python 2 module, run the following commands:

mkdir python2 &&
pushd python2 &&
../configure --prefix=/usr --with-python=/usr/bin/python &&
make &&
popd

To test the results, issue: make -C python2 check. An already active graphical session with bus address is necessary to run the tests.

To build PyGObject3 as the Python 3 module, run the following commands:

mkdir python3 &&
pushd python3 &&
../configure --prefix=/usr --with-python=/usr/bin/python3 &&
make &&
popd

To test the results, issue: make -C python3 check. An already active graphical session with bus address is necessary to run the tests.

To install the Python 2 module, run the following command as the root user:

make -C python2 install

To install the Python 3 module, run the following command as the root user:

make -C python3 install

Contents

Introduction to PyGTK Module

PyGTK lets you to easily create programs with a graphical user interface using the Python programming language.

This package is known to build and work properly using an LFS-8.1 platform.

Package Information

PyGTK Dependencies

Required

PyGObject-2.28.6

Required (atk module)

ATK-2.24.0

Required (pango module)

Pango-1.40.10

Required (pangocairo module)

PyCairo-1.15.1 (Python 2) and Pango-1.40.10

Required (gtk and gtk.unixprint modules)

PyCairo-1.15.1 (Python 2) and GTK+-2.24.31.

Required (gtk.glade module)

PyCairo-1.15.1 (Python 2) and libglade-2.6.4.

Optional

NumPy

Optional (to Build Documentation)

libxslt-1.1.29

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/pygtk

Installation of PyGTK

Install PyGTK by running the following commands:

./configure --prefix=/usr &&
make

The tests must be run from an active X display. If this is so, issue: make check.

Now, as the root user:

make install

Command Explanations

--enable-docs: This option enables rebuilding the html documentation if libxslt-1.1.29 is installed.

Contents

Introduction to PyXDG Module

PyXDG is a Python library to access freedesktop.org standards.

This package is known to build and work properly using an LFS-8.1 platform.

Package Information

PyXDG Dependencies

Required

Python-2.7.13 and/or Python-3.6.2

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/pyxdg

Installation of PyXDG

To install the Python 2 module, run the following command as the root user:

python setup.py install --optimize=1

To install the Python 3 module, run the following command as the root user:

python3 setup.py install --optimize=1

Contents

Introduction to the funcsigs Module

funcsigs is a is a backport of the PEP 362 function signature features from Python 3.3's inspect module for Python 2.x.

This package is known to build and work properly using an LFS-8.1 platform.

Package Information

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/funcsigs

Installation of funcsigs

To install the Python 2 module, run the following command as the root user:

python setup.py install --optimize=1

Contents

Introduction to Beaker Module

Beaker is a Python module that implements caching and sessions WSGI middleware for use with web applications and stand-alone Python scripts and applications.

This package is known to build and work properly using an LFS-8.1 platform.

Package Information

Beaker Dependencies

Optional

funcsigs-1.0.2 (required for Python-2.7)

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/Beaker

Installation of Beaker

To install the Python 2 module, run the following command as the root user:

python setup.py install --optimize=1

To install the Python 3 module, run the following command as the root user:

python3 setup.py install --optimize=1

Contents

Introduction to lxml

lxml provides Python bindings for libxslt-1.1.29 and libxml2-2.9.4.

This package is known to build and work properly using an LFS-8.1 platform.

Package Information

lxml Dependencies

Required

libxslt-1.1.29

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/lxml

Installation of lxml

To install the Python 2 module, run the following commands as the root user:

python setup.py build &&
python setup.py install --optimize=1

To install the Python 3 module, run the following commands as the root user:

python3 setup.py clean &&
python3 setup.py build &&
python3 setup.py install --optimize=1

Contents

Introduction to MarkupSafe Module

MarkupSafe is a Python module that implements a XML/HTML/XHTML Markup safe string.

This package is known to build and work properly using an LFS-8.1 platform.

Package Information

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/MarkupSafe

Installation of MarkupSafe

To build the Python 2 module, run the following command:

python setup.py build

To install the Python 2 module, run the following command as the root user:

python setup.py install --optimize=1

To build the Python 3 module, run the following command:

python3 setup.py build

To install the Python 3 module, run the following command as the root user:

python3 setup.py install --optimize=1

Contents

Introduction to Jinja2 Module

Jinja2 is a Python module that implements a simple pythonic template language.

This package is known to build and work properly using an LFS-8.1 platform.

Package Information

Jinja2 Dependencies

Required

MarkupSafe-1.0

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/Jinja2

Installation of Jinja2

To install the Python 2 module, run the following command as the root user:

python setup.py install --optimize=1

To install the Python 3 module, run the following command as the root user:

python3 setup.py install --optimize=1

Contents

Introduction to Mako Module

Mako is a Python module that implements hyperfast and lightweight templating for the Python platform.

This package is known to build and work properly using an LFS-8.1 platform.

Package Information

Mako Dependencies

Required

Beaker-1.9.0 and MarkupSafe-1.0

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/Mako

Installation of Mako

To install the Python 2 module, run the following command as the root user:

python setup.py install --optimize=1

To install the Python 3 module, run the following command as the root user:

sed -i "s:mako-render:&3:g" setup.py &&
python3 setup.py install --optimize=1

Command Explanations

sed -i "s:mako-render:&3:g" setup.py: This sed prevents setup.py from overwriting an already installed script by the Python 2 module. Remove it if you are building this module only for Python 3.

Contents

Introduction to PyYAML Module

PyYAML is a Python module that implements the next generation YAML parser and emitter.

This package is known to build and work properly using an LFS-8.1 platform.

Package Information

PyYAML Dependencies

Required

Python-2.7.13 and/or Python-3.6.2 and YAML-0.1.7

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/PyYAML

Installation of PyYAML

To build the Python 2 module, run the following command:

python setup.py build

To install the Python 2 module, run the following command as the root user:

python setup.py install --optimize=1

To build the Python 3 module, run the following command:

python3 setup.py build

To install the Python 3 module, run the following command as the root user:

python3 setup.py install --optimize=1

Contents

Introduction to Scour

Scour is an SVG (Scalable Vector Graphics) optimizer/cleaner that reduces their size by optimizing structure and removing unnecessary data.

This package is known to build and work properly using an LFS-8.1 platform.

Package Information

Scour Dependencies

Optional (for the main test)

Six

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/scour

Installation of scour

To build the Python 2 module, issue:

python setup.py build

To partially test the results, issue: python testcss.py. If you have installed Six you can run the main tests by issuing: python testscour.py.

To install the Python 2 module run the following command as the root user:

python setup.py install --optimize=1

Contents

Introduction to Six Module

Six is a Python 2 and 3 compatibility library.

This package is known to build and work properly using an LFS-8.1 platform.

Package Information

Six Dependencies

Required Dependencies

Python-2.7.13 and/or Python-3.6.2

User Notes: http://wiki.linuxfromscratch.org/blfs/wiki/six

Installation of six

Install six for Python2 by running the following commands:

python2 setup.py build

This package does not come with a test suite.

Now, as the root user:

python2 setup.py install --optimize=1

Install six for Python3 by running the following commands:

python3 setup.py build

This package does not come with a test suite.

Now, as the root user:

python3 setup.py install --optimize=1

Contents