The cpio package contains tools for archiving.
This package is known to build and work properly using an LFS 12.1 platform.
Download (HTTP): https://ftp.gnu.org/gnu/cpio/cpio-2.15.tar.bz2
Download MD5 sum: 3394d444ca1905ea56c94b628b706a0b
Download size: 1.6 MB
Estimated disk space required: 21 MB (with tests and docs)
Estimated build time: 0.3 SBU (with tests and docs)
Install cpio by running the following commands:
./configure --prefix=/usr \
--enable-mt \
--with-rmt=/usr/libexec/rmt &&
make &&
makeinfo --html -o doc/html doc/cpio.texi &&
makeinfo --html --no-split -o doc/cpio.html doc/cpio.texi &&
makeinfo --plaintext -o doc/cpio.txt doc/cpio.texi
If you have texlive-20230313 installed and wish to create PDF or Postscript documentation, issue one or both of the following commands:
make -C doc pdf && make -C doc ps
To test the results, issue: make check.
Now, as the root user:
make install &&
install -v -m755 -d /usr/share/doc/cpio-2.15/html &&
install -v -m644 doc/html/* \
/usr/share/doc/cpio-2.15/html &&
install -v -m644 doc/cpio.{html,txt} \
/usr/share/doc/cpio-2.15
If you built PDF or Postscript documentation, install it by issuing
the following commands as the root
user:
install -v -m644 doc/cpio.{pdf,ps,dvi} \
/usr/share/doc/cpio-2.15
--enable-mt: This parameter
forces the building and installation of the mt program.
--with-rmt=/usr/libexec/rmt: This
parameter inhibits building the rmt program as it is already
installed by the Tar package in
LFS.